Papers

A- SCI Indexed Papers

A1.  Çolak I., Kabalcı E., Bayındır R., “Review of Multilevel Voltage Source Inverter Topologies and Control Schemes,” Energy Conversion and Management, Vol. 52, pp. 1114–1128, 2011.
A2.  Kabalcı E., Irmak E., Çolak I., “Design of an AC-DC-AC converter for wind turbines”, International Journal of Energy Research, Wiley Interscience, DOI: 10.1002/er.1770, Vol. 36, No. 2, pp. 169-175, 2011.
A3.  Çolak I., Kabalcı E., “Practical Implementation of a DSP Controlled Multilevel Inverter with Low THD for Motor Drive Applications”, Journal of Power Sources, Volume 196, pp. 7585– 7593, 2011.
A4.  Kabalcı E., “Development of a Feasibility Prediction Tool for Solar Power Plant Installation Analyses”, Applied Energy, Volume 88, pp. 4078–4086, 2011.
A5.  Colak I., Irmak E., Kabalci E. and Issi F., “Design and Implementation of A Remote Laboratory Platform Using MATLAB Builder for NE”, Computer Applications in Engineering Education, DOI: 10.1002/cae.21553, 2011.
A6.  Kabalcı E., Kabalcı Y., Develi I., “Modelling and Analysis of a Power Line Communication System with QPSK Modem for Renewable Smart Grids”, International Journal of Electrical Power and Energy Systems, DOI:10.1016/j.ijepes.2011.08.021, Vol. 34, No. 1, pp. 19-28, 2012.
A7.  Colak I., Demirtas M., Kabalci E., “Design and Optimisation of a Resonant DC Link Inverter for Solar Energy Systems”, COMPEL, Vol. 32, Issue 1, pp. ?-?, 2013.

B. Proceedings:

B1.  Çolak I., Kabalcı E., Bayındır R. and Sagiroglu S., “The Design Analysis of a 5-Level Cascaded Voltage Source Inverter with Low THD”, IEEE International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), Lisbon, Portugal, 18-20 March, 2009, pp. 575–580.
B2.  Bayındır R., Çolak I., Kabalcı E. and Gorgun A., “PID Controlled Synchronous Motor for Power Factor Correction”, IEEE International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), Lisbon, Portugal, 18-20 March, 2009, pp. 408–412.
B3.  Çolak I., Kabalcı E. and Kabalcı Y., “Hardware Implementation for Electronics Laboratory: Design and Application of a Microprocessor Controlled Oscilloscope”, 1st International Vocational High School Symposium, Konya-Turkey, 27-29 May, 2009, pp. 642–651.
B4.  Çolak I., Kabalcı E., Irmak E., Bayındır R., “Design of a 6-Pulse Multilevel SPWM Controlled Converter For Fixed Speed Wind Turbines”, 5th International Conference on Technical and Physical Problems of Power Engineering, TPE-2009, 3-5 Sept., 2009, Bilbao, Spain, pp. 293–297.
B5.  Çolak I., Kabalcı E., Irmak E., Bayındır R., “Modelling of an SPWM Controlled AC-DC-AC Converter for Fixed Speed Wind Turbines”, 5th International Conference on Technical and Physical Problems of Power Engineering, TPE-2009, 3-5 Sept., 2009, Bilbao, Spain, pp. 288–293.
B6.  Çolak I., Kabalcı E., Bayındır R., Bal G., “Modelling of a Three Phase SPWM Multilevel VSI with Low THD Using Matlab/Simulink”, EPE 2009, 8-10 September, 2009, Barcelona, Spain, pp. 1–10.
B7.  Bayındır R., Çolak İ., Kabalcı E., Irmak E., “The Fuzzy Logic Control of a Multilevel Converter in a Variable Speed Wind Turbine”, IEEE 8th International Conference on Machine Learning and Applications ICMLA’09, December 13-15, 2009, Miami, FL, USA, pp. 787-790.
B8.  Kabalcı E., Keven G., Cicek S., “Hydroelectric Plants in Turkey and Portion in the Energy Generation”, 3rd International Security Symposium (Energy Security) ISS-2010, April 15-16, Istanbul, Turkey, pp. 190-200.
B9.  Kabalcı E., Cicek S., Keven G., “Wind Power and Improvement in Turkey”, 3rd International Security Symposium (Energy Security) ISS-2010, April 15-16, Istanbul, Turkey, pp. 287-297.
B10.  Çolak I., Bayındır R., Kabalcı E., “Design and Analysis of a 7-Level Cascaded Multilevel Inverter with Dual SDCSs”, IEEE 20th International Symposium on Power Electronics, Electrical Drives, Automation and Motion-SPEEDAM 2010, June 14-16, 2010, Pisa, Italy, pp. 180-185.
B11.  Kabalcı E., and Kabalcı Y., “BPSK Modem Based Power Line Communication System for Observing Photovoltaic Panels”, 2nd International Conference on Nuclear and Renewable Energy Resources (NURER 2010), July 4-7, 2010, Ankara, Turkey, pp. 284-289.
B12.  Çolak I., Kabalcı E., “Increasing The Efficiency of an Inverter Used in Renewable Energy Sources”, 2nd International Conference on Nuclear and Renewable Energy Resources (NURER 2010), July 4-7, 2010, Ankara, Turkey, pp. 853-859.
B13.  Çolak I., Bayındır R., Kabalcı E., “A Modified Harmonic Mitigation Analysis Using Third Harmonic Injection PWM in a Multilevel Inverter Control”, 14th Power Electronics and Motion Control Conference-EPE-PEMC 2010, September 6-8, 2010, Ohrid, Macedonia, pp. T2-215-T2-220.
B14.  Irmak E., Kabalcı E., Köse A., “Design and Implementation of a Computer Interacted Smart Home System Based on PLC”, IEEE 4th International Conference on Application of Information and Communication Technologies, October 12-14, 2010, Tashkent Uzbekistan, pp.1-5.
B15.  Çolak I., Demirtas M., Kabalcı E., “A Novel Converter Design and Optimisation for Solar Energy Systems”, EVER 2011, March 31-April 3 2011, Monaco, pp. 1-11.
B16.  Çolak I., Kabalcı E., Bal G., “Parallel DC-AC Conversion System Based on Separate Solar Farms with MPPT Control”, IEEE 8th International Conference on Power Electronics, May 30-June 3 2011, Jeju Korea, pp. 1469-1475.
B17.  Çolak I., Kabalcı E., Yesilbudak M., Kahraman H.T., “A Novel Intelligent Decision Support Tool For Average Wind Speed Clustering”, IEEE 8th International Conference on Power Electronics, May 30-June 3 2011, Jeju Korea, pp. 2010-2014.
B18.  Çolak I., Kabalcı E., Yesilbudak M., “An Agglomerative Hierarchical Clustering Tool for Renewable Energy Sources”, IEEE 3rd International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), May 11-13 2011, Malaga, Spain, pp. 1-5
B19.  Kabalcı E., Çolak I., Bayındır R., Pavlitov C., “Modelling a 7-Level Asymmetrical H-Bridge Multilevel Inverter with PS-SPWM Control”, IEEE International Aegean Conference on Electric Machines and Power Electronics & Electromotion Joint Conference-ACEMP 2011, Sept 8-10 2011, Istanbul, pp. 593-597.
B20.  Çolak I., Irmak E., Yesilbudak M., Kabalcı E., “Design of a Parameter Determination System for Non-Isolated Converter Topologies”, IEEE International Aegean Conference on Electric Machines and Power Electronics & Electromotion Joint Conference-ACEMP 2011, Sept 8-10 2011, Istanbul, pp.241-244.
B21.  Bayındır R., Gok M., Kabalcı E., Kaplan O., “An Intelligent Power Factor Correction Approach Based on Linear Regression and Ridge Regression Methods”, IEEE 10th International Conference on Machine Learning and Applications ICMLA’11, December 18-22, 2011, Honolulu, HI, USA, pp. 313-315.
B22.  Kabalcı E., Battal F., Battal O., “Modelling of a Hybrid Renewable Energy Conversion System”, 3rd International Conference on Nuclear and Renewable Energy Resources (NURER 2012), May 20-23, 2012, Istanbul, Turkey, pp. 1-6.
B23.  Kabalcı E., Kabalcı Y, Bayındır R., “Modelling of an Advanced Metering Infrastructure to Observe the Renewable Microgrids”, IEEE 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion-SPEEDAM 2012, June 20-22, 2012, Sorrento, Italy, pp. 180-184.
B24.  Irmak E., Colak I., Kabalcı E., Kose A. “Implementation of an Interactive Remote Laboratory Platform for Stepper Motor Experiments”, 15th Power Electronics and Motion Control Conference-EPE-PEMC 2012, September 4-6, 2012, Novi Sad, Serbia, pp. DS3e.5-1-DS3e.5-5.
B25.  Bayındır R, Kabalcı E, Kaplan O, Oz Y.E., “Microcontroller Based Electrical Machines Training Set” EPE-PEMC 15th Power Electronics and Motion Control Conference-EPE-PEMC 2012, September 4-6, 2012, Novi Sad, Serbia, pp. DS3e.12-1-DS3e.12-4
B26.  Bayındır R, Kabalcı E, Keven G., Can C., “Development of Matlab/GUI Based Analysis Tool for Wind Turbines”, The European Conference & Workshop on Renewable Energy Systems, 17-28 September 2012, Alanya, Antalya, Türkiye, pp.1-5.
B27.  Irmak E., Colak I., Sagiroglu S., Köse A., Kabalcı E., “Monitoring The Quality Of Electrical Energy and Improving It Using Thyristor Controlled Reactor”, International Conference on Renewable Energy Research and Applications (ICRERA), 11-14 November 2012, Nagasaki Japan, pp.1-5.
B28.  Bayındır R, Kabalcı E, Can C., “Optimization of Operating Conditions of Photovoltaic Systems: A Case Study”, International Conference on Renewable Energy Research and Applications (ICRERA), 11-14 November 2012, Nagasaki Japan, pp.1-4.
B29.  Kabalcı E., Kabalcı Y, “Modelling and Analysis of a Power Line Communication Infrastructure for Wind Energy Conversion Systems”, IEEE ISPLC 2013, 24-27 March, Johannesburg, S. Africa, pp. 131-136.
B30.  Yesilbudak M., Kabalcı E., Colak I., Sagiroglu S, “Short Term Pitch Angle Optimization in Wind Turbines: A Machine Learning Approach”, 4th International Conference on Power Engineering, Energy and Electrical Drives, 13-17 May 2013, Istanbul, Turkey.
B31.  Kabalcı E., Kabalcı Y, “Multi-Channel Power Line Communication System Design for Hybrid Renewables”, 4th International Conference on Power Engineering, Energy and Electrical Drives, 13-17 May 2013, Istanbul, Turkey.
B32.  Kabalcı E., Gorgun A., Kabalcı Y, “Design and Implementation of a Renewable Energy Monitoring System”, 4th International Conference on Power Engineering, Energy and Electrical Drives, 13-17 May 2013, Istanbul, Turkey.
B33.  Çolak I., Kabalcı E., Keven G., “Comparision of Multi-Carrier Techniques in Seven-Level Asymmetric Cascade Multilevel Inverter”, 4th International Conference on Power Engineering, Energy and Electrical Drives, 13-17 May 2013, Istanbul, Turkey.
B34.  Kabalcı Y, Develi İ., Kabalcı E., “LDPC Coded OFDM Systems over Broadband Indoor Power Line Channels: A Performance Analysis”, 4th International Conference on Power Engineering, Energy and Electrical Drives, 13-17 May 2013, Istanbul, Turkey.